Electrolux ESF 68070 사용자 설명서 - 페이지 14
{카테고리_이름} Electrolux ESF 68070에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ESF 68070 20 페이지.
Electrolux ESF 68070에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
14 electrolux
CARE AND CLEANING
To remove and clean the filters
Dirty filters decrease the washing results.
Although the maintenance is very low with
these filters, make a check at intervals and
if necessary, clean them.
1. Turn the filter (A) counterclockwise and
remove it out from filter (B).
B
A
2. Filter (A) has two parts. To disassemble
the filter, pull them apart.
WHAT TO DO IF...
The appliance does not start or stops dur-
ing operation.
Malfunction
The appliance does
not fill with water.
Fault code
• An audible signal
operates.
• The display shows a
message.
3. Fully clean the parts with water.
4. Put the two parts of the filter (A) togeth-
er and push. Make sure that they as-
semble correctly in each other.
5. Remove the filter (B).
6. Fully clean the filter (B) with water.
7. Put the filter (B) to its initial position.
Make sure that it assembles correctly in
the two guides (C).
8. Put the filter (A) into position in filter (B).
Turn the filter (A) clockwise until it locks.
To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clog-
ged, remove remaining parts of soil with a
thin pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance
and control panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive
cleaning pads or solvents (acetone).
First try to find a solution to the problem (re-
fer to the chart). If not, contact the service
centre.
Possible cause
The water tap is
closed.
The water pressure is
too low.
C
Possible solution
Open the water tap.
Contact your local wa-
ter authority.