Electrolux ESF 68070 사용자 설명서 - 페이지 11

{카테고리_이름} Electrolux ESF 68070에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ESF 68070 20 페이지.
Electrolux ESF 68070에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

Electrolux ESF 68070 사용자 설명서
Use of rinse aid
Rinse aid makes it possible to dry the
dishes without streaks and stains.
The rinse aid dispenser automatically
adds rinse aid during the last rinsing
phase.
Do these steps to fill the rinse aid dispens-
er:
1. Press the release button
5
lid
of the rinse aid dispenser.
2. Fill the rinse aid dispenser
aid. The mark 'max' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent too much foam
during the washing programme.

MULTITAB FUNCTION

The multitab function is for combi detergent
tablets.
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
Do a check if these tablets are applicable
for the local water hardness. Refer to the in-
structions from the manufacturer.
When you set the multitab function, it stays
on until you deactivate it.
The multitab function deactivates the flow
of rinse aid and salt.
The multitab function deactivates the salt
and the rinse aid messages.
The programme duration can increase if
you use the multitab function.
Activate the multitab function before
the start of a washing programme.
You cannot activate the multitab func-
tion when the programme operates.

LOADING CUTLERY AND DISHES

Refer to the leaflet 'Examples of Real-
Life loads'.
Hints and tips
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove the remaining food from the
items.
4. Close the rinse aid dispenser. Press the
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector
decrease the dosage.
6
to open the
3
with rinse
To activate the multitab function
• Go to the option menu and activate the
To deactivate the multitab function and use
separately detergent, salt and rinse aid:
1. Go to the option menu and deactivate
2. Fill the salt container and rinse aid dis-
3. Adjust the water hardness setting to the
4. Do a washing programme without
5. Adjust the water softener to the water
6. Adjust the rinse aid dosage.
• Make soft the remaining burned food on
• Put hollow items (cups, glasses and
• Make sure that water does not collect in
• Make sure that cutlery and dishes do not
lid until it locks into position.
The display shows a message when
the rinse aid dispenser is empty
The message does not show while a
washing programme operates.
multitab function. Refer to 'Control pan-
el'.
the multitab function. Refer to 'Control
panel'.
penser.
highest level.
dishes.
hardness in your area.
the items.
pans) with the opening down.
containers or in bowls.
bond together.
electrolux 11
4
to increase or