Carlton C22FPS09 사용 설명서 - 페이지 8

{카테고리_이름} Carlton C22FPS09에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carlton C22FPS09 17 페이지.

Feed Tube and Pusher

Use the feed tube to add liquid and/or solid ingredients. Use

the pusher to push solid ingredients through the feed tube.

You can also use the pusher to close the feed tube in order to

prevent ingredients from escaping through the feed tube.

The Knife Blade can be used for chopping, mixing, blending

and pureeing.

Place the Knife Blade down onto the centre post inside

the Bowl.

Note: The cutting edges of the blade are very sharp. Avoid touch-

ing them!

Put the ingredients in the Bowl. Pre-cut large pieces of food into pieces of approx.

3 x 3 x 3 cm. Put the Lid on the Bowl.

Put the pusher in the feed tube.

Turn the control to Pulse position (HIGH or LOW for continuous operation).

Hold the Pulse position for about 2-3 seconds and check your results. Repeat for

desired consistency. It is better to use several short operations rather than a

single long one unless mixing ingredients that require longer processing times.

After you have finished food processing, release the Pulse position. If you were

using on HIGH or LOW, turn the control to OFF position. Allow the Knife Blade to

stop running.

Carefully remove the Knife Blade from the Bowl. Unlock the Bowl by turning the

handle to the left, and lift the Bowl off. Empty the processed food.

Tips

•

Control the chopping time to prevent the food from becoming too finely

chopped.

•

Do not let the appliance run too long when you are chopping (hard) cheese. The

cheese will become too hot, start to melt and turn lumpy.

•

Do not use the blade to chop very hard ingredients like coffee beans, turmeric, nut-

meg and ice cubes, as this may cause the blade to get blunt.