Formech 450 설치, 운영 및 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Formech 450에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formech 450 14 페이지. Single heater vacuum forming machine

Introduction

The Formech

rmech

rmech 450

450

450 is a manually operated vacuum forming machine that is capable of

450

producing high quality plastic mouldings from material up to 450mm x 450mm with a

maximum draw height of 229mm. Materials up to 6mm can be specified.

Operating from a normal domestic electrical supply the 450 is easy to use and with its simple,

accessible controls provides a fast sampling and production back up facility avoiding the

costly interruption of production equipment.

The 450 incorporate powerful infrared ceramic heaters, which are thermostatically controlled

in concentric zones. A powerful reverse-blow facility to release the moulding from the tool is

integrated into the 450.

Incorporating the latest technology the Fo

producing prototype or production runs of components in a variety of plastics. A timer is fitted

as standard.

The machine has been designed to be highly adaptable and functions such as changing a

mould, or fitting reducing windows (which allow smaller sheets to be used) can be carried out

in the minimum amount of time.

This manual informs the user on machine assembly, operation and service. It also provides

an introduction into vacuum forming with some useful advise on mould making and post

forming processes. If you would like a more comprehensive guide to the vacuum forming

process then please visit the support section of the Formech web page. A Training Manual is

provided in download and printable format.

Formech 450 is ready to use in minutes, quickly

Formech 450