Atherton ATT043 사용자 설명서 - 페이지 5

{카테고리_이름} Atherton ATT043에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atherton ATT043 11 페이지. 4.3" tvi/ahd test monitor

1. Scope

This specification is used to define the performance of ATT043 TVI/AHD test monitor.

ATT043 supports CVBS, AHD and TVI. For CVBS, both NTSC and PAL system can be

auto detected. For AHD or TVI, both systems can support up to Full HD mode.

After you unpack your OLED test monitor, make sure the following items are

included in the box and in good conditions:

 4.3" test monitor

 Charger (Power Adaptor)

 Power Cord

 DC-DC cable

 Wrist Band

 Carrying case

 User's Manual

Charging the battery

 The embedded Li-ion battery must be fully charged before your first time to use it.

Please always use the charger along with this device to charging monitor.

 During the charging period, the Charge LED indicates steady amber. Once charging

completed, the Charge LED turns off.

[NOTE]: 1. The charging process must be performed under room temperature. Extreme

high or low, environment temperature is harmful for battery.

2. Operating the monitor during charging period could extend charging time or

damage battery.