AND UA-1010 사용 설명서 - 페이지 8

{카테고리_이름} AND UA-1010에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AND UA-1010 20 페이지.
AND UA-1010에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

1. Remove the battery cover.

2. Remove the used batteries and

insert new batteries into the battery

compartment as shown, taking

care that the polarities (+ and -) are

correct.

Use only R6P, LR6 or AA batteries.

3. Attach the battery cover.

CAUTION

Insert the batteries as shown in the battery compartment. If installed

incorrectly, the device will not work.

When

(LOW BATTERY mark) blinks on the display, replace all batteries

with new ones. Do not mix old and new batteries. It may shorten the battery

life, or cause the device to malfunction.

Replace the batteries two seconds or more after the device turns off.

(LOW BATTERY mark) appears even after the batteries are replaced, make

a blood pressure measurement. The device may then recognize the new batteries.

(LOW BATTERY mark) does not appear when the batteries are drained.

The battery life varies with the ambient temperature and may be shorter at

low temperatures.

Use the specified batteries only.

Remove the batteries if the device is not to be used for a long time.

The batteries may leak and cause a malfunction.

Insert the air connector plug into

the air socket firmly.

Insert the AC adapter plug into the

DC jack.

Next, connect the AC adapter to an

electrical outlet.

Use the specified AC adapter.

(Refer to page 18.)

Using the Monitor

English 7

Step 1

Step 3

Air socket

Air connector plug

AC adapter plug

DC jack

Step 1

Step 2