AND UA-1020 사용 설명서 - 페이지 10

{카테고리_이름} AND UA-1020에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AND UA-1020 20 페이지.
AND UA-1020에 대해서도 마찬가지입니다: 빠른 시작 카드 (2 페이지)

페이지 인쇄

Applying the Arm Cuff

1. Wrap the cuff around the upper

arm, about 1-2 cm above the

inside of the elbow, as shown.

Place the cuff directly against the

skin, as clothing may cause a faint

pulse, and result in a measurement

error.

2. Constriction of the upper arm, caused

by tightly rolling up a shirtsleeve, may

prevent accurate readings.

Symbols that are printed on the cuff

Symbols

Function/Meaning

Artery Position Mark

Catalog Number

REF

Lot Number

How to Take Accurate Measurements

For the most accurate blood pressure measurement:

Sit comfortably at a table. Rest your arm on the table.

Relax for about five to ten minutes before measurement.

Place the center of the cuff at the same level as your heart.

Remain still and keep quiet during measurement.

Do not measure right after physical exercise or a bath. Rest for twenty or

thirty minutes before taking the measurement.

Try to measure your blood pressure at the same time every day.

Measurement

During measurement, it is normal for the cuff to feel very tight. (Do not be

alarmed).

After Measurement

After measurement, press the START button to turn the device off. After one

minute of non-operation, the device will turn off automatically.

Remove the cuff and record your data.

Note: Allow at least three minutes between measurements on the same person.

Using the Monitor

Set the

arm or in line with the ring finger on the

inside of the arm.

English 9

Do not roll up shirtsleeve tightly.

Cuff

1-2 cm

Artery position mark

Secure the fabric fastener

firmly.

Recommended Action

mark on the artery of the upper

Air Hose