CommScope 360-iP-PMAX-GS5-48 지침서 - 페이지 6

{카테고리_이름} CommScope 360-iP-PMAX-GS5-48에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. CommScope 360-iP-PMAX-GS5-48 6 페이지. Modular panel

Installing the Patch Cord Management

and Front Bezel

To complete the installation of the SYSTIMAX 360

PATCHMAX

Modular Panel, install the patch cord management

and bezel on the front of the panel.

To install the patch cord management and front bezel:

1 Align the patch cord management as shown in Figure 14 and

slide it onto the mounting arms until fully seated.

Figure 14 Installing the Patch Cord Management

2 Position the front bezel at an angle as shown in Figure 15 and

insert the 2 bottom retention tabs into the slots on the patch cord

management.

3 Pivot the top of the bezel towards the panel until the 3 tabs on

the top of the bezel snap into the panel (Figure 15).

Figure 15 Installing the Front Bezel

4 Restore power to the rack's Panel Manager.

Instruction Sheet: SYSTIMAX 360™ iPatch

How To Contact Us

To find out more about SYSTIMAX

www.commscope.com/systimax

™

iPatch

For technical assistance regarding SYSTIMAX products:

Within the United States, contact your local account

representative or CommScope Technical Support at

1-800-344-0223.

From outside the United States, contact your local account

representative or Authorized BusinessPartner.

PATCHMAX

Modular Panel

Solutions, visit us on the web at