AND UA-767PC 사용 설명서 - 페이지 8
{카테고리_이름} AND UA-767PC에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AND UA-767PC 17 페이지. Digital blood pressure monitor
페이지 인쇄1.
Place the cuff on the arm (preferably the left arm).
2.
Set the PRESSURE switch to a value that will be 30 to 40 mmHg above the
expected systolic value and press the START button.
•
When the START button is pressed, all of the display symbols will appear
for about one second.
•
When the "0" is blinking, the device is calibrating its zero point. If there is
still some air in the arm cuff, it will be exhausted at this time.
•
The micro pump will pressurize the cuff.
Note: The cuff will become very tight. Do not be alarmed, as this is
normal.
•
If the START button or clock button is pressed again during
pressurization or during the measurement, the pump will stop and the air
will be released from the cuff.
3.
When pressurization has completed, the automatic exhaust mechanism will
gradually reduce the pressure in the cuff and the Measurement in Progress
symbol will appear along with the current pressure reading. This symbol will
flash in unison with the pulse of the person being monitored.
Measurements
7
Measurement in
Progress