CommScope 760242975 지침서 - 페이지 6

{카테고리_이름} CommScope 760242975에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. CommScope 760242975 9 페이지. Powered fiber cable transition box

860660202

Rev. B

Instruction Sheet

Step 2 – Route and terminate outgoing/outdoor Powered Fiber Cable (PFC)

1. Route the outgoing PFC into the TB and secure to the strain relief bar with a supplied cable

tie, as shown in Figure 9. Ensure adequate length for fiber slack (1-1.5 meters).

2. Separate the cable into three sections along the tear lines, as shown in Figure 9.

3. For the outgoing power termination repeat steps 3 – 5 from Section 6 Step 1, verifying any

end device powered equipment wiring polarity with polarity connections on terminal strip,

as shown in Figure 10.

Note:

Polarization indentation along one side of the cable for polarity identification

Figure 8

www.commscope.com

Page 6 of 9