Athletica Sport Systems GlassFlex 매뉴얼 - 페이지 5

{카테고리_이름} Athletica Sport Systems GlassFlex에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Athletica Sport Systems GlassFlex 7 페이지.

GlassFlex® adjustment

Product Manual

Step 3: Adjusting U-Bolts and GlassFlex® Buffers to level shielding (cont'd)

Start to tighten the top nuts (fig. 5) through the access holes inside the aluminum tube. Tighten the two top nuts

equally to ensure the bottom on the U-Bolt remains level.

Repeat this for both U-Bolts supporting a single section of GlassFlex® channel until the shielding leans towards the

ice surface (fig. 6).

Use a suction cup attached to the shielding and shake the shielding as you adjust the U-Bolt. This will help in

making sure the shielding is level.

When you have completed the adjustments, use a level to ensure you are 'level to 1/4" leaning over 3 feet' towards

the ice surface.

When the U-Bolt is in the desired position and level, raise the center nuts (fig. 7) under the tube until they are tight

against the tube (fig. 8) and the U-Bolt is rigid.

fig. 5

fig. 7

554 Parkside Drive, Waterloo, Ontario, Canada N2L 5Z4 TEL 519-747-1856

720 Innovation Drive, Shakopee, Minnesota, USA 55379 TEL 763-249-7465

fig. 6

fig. 8