CommScope TDUX-75 설치 지침 - 페이지 4

{카테고리_이름} CommScope TDUX-75에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CommScope TDUX-75 4 페이지. Inflatable duct seal for telephone cable ducts

7. Install the TDUX duct seal following the

standard TDUX installation procedure.

6 Removal

If required, lubricant is separately available.

6.1 Deflate the TDUX seal by piercing with a

screw-driver. Release the TDUX from the duct

wall by using a blunt tool.

6.4 Multiple cables/ducts with CL-clips

If necessary, remove tape (and tie wrap) from

the cable bundle. Spread cables and apply

lubricant in the crunch area. Remove clip core

and sealant as much as possible with a pair

of pliers.

To find out more about CommScope® products, visit us on the

web at www.commscope.com

For technical assistance, customer service, or to report any

missing/damaged parts, visit us at:

http://www.commscope.com/SupportCenter

6.2 Release TDUX from the cable bundle.

Apply lubricant on the released areas to faci-

litate removal of the TDUX from the duct wall

with the lubricant bottle.

TDUX and all trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.

This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to

CommScope products or services.

This product is covered by one or more U.S. patents or their foreign equivalents. For patents, see:

www.commscope.com/ProductPatent/ProductPatent.aspx.

6.3 Pull TDUX out of the duct with a pair of

pliers.