CommScope CMAX-DM20 설치 지침 - 페이지 3

{카테고리_이름} CommScope CMAX-DM20에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CommScope CMAX-DM20 6 페이지. Cmax antennas
CommScope CMAX-DM20에 대해서도 마찬가지입니다: 설치 매뉴얼 (4 페이지)

페이지 인쇄

3. Pole Mounting

3.1. Pole Mounting with Lashing Straps (suggestion)

Note:

This pole mounting procedure is for reference only. Other than the shown pole

mounting material can be used to mount bracket and antenna to a pole. Make

sure the installation will safely support the combined load of the bracket, antenna,

and connected cables.

200 mm max.

1. Lay proper lashing straps around pole and lead them through mounting bracket.

2. Adjust bracket in antenna direction and fasten bracket.

3.2. Optional Pole Mounting Kit

Optionally, a pole-mounting kit can be ordered separately from the supplier (ID 7814722).

The recommended pole diameter for this mounting kit is 60 - 150 mm. To mount an antenna

to a pole using this kit, proceed as follows:

1. Insert the four bolts M8x200 (2) with four of the filet washers (5) into the antenna

mounting bracket (see detailed illustration of bolt head)

2. Insert the pole mounting bracket into these four bolts and place the filet & spring

washers (4 & 5) and the M8 nuts (3) over each bolt (detailed illustration).

3. Tighten the four M8 nuts observing the specified torque of 27 Nm.

4. Hang in the safety wire (6) and attach it to a suitable structure for fall protection.

Installation Instruction for CMAX Antennas

Pole

Antenna

Pedastal

Lashing

Straps