Dreame H12 사용자 설명서 - 페이지 8

{카테고리_이름} Dreame H12에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dreame H12 14 페이지. Wet and dry vacuum

How to Use

Self-cleaning Mode

1. Place the appliance back onto the base while you finish cleaning.

2. Briefly press the self-cleaning button

cleaning.

3. Empty the Used Water Tank while self-cleaning is completed. Then the appliance

starts drying mode. Press the button

Note: The self-cleaning mode can be enabled only when the appliance is being charged and the battery level is

more than 15%.

Drying Mode

1. Press and hold the self-cleaning button

2. The appliance will be charged once drying is completed.

Minimum Water Level

自清洁水位线

of Self-Cleaning

Note:

•

Clean the charging base if there are any stains left on the base after self-cleaning is complete.

•

If cleaning the brush roller manually, please air dry thoroughly or dry it by using drying mode several times.

on the top of the handle to start/stop self-

to exit drying mode.

for 3 seconds to activate drying mode.

How to Use

Using as a Handheld Vacuum

1. Press the handvac release button to remove the handvac.

2. Install the dust cup assembly and other attachments as shown in the diagram until

you hear a click.

3. Briefly press the handvac power switch

mode switch

to switch between Standard mode and Turbo mode according to your

needs.

咔哒

Click

to start operating. Briefly press the handvac

咔哒

Click

咔哒

Click

Note: Motorized mini-brush should not be used with

the extension rod.