CommScope 360G2-iP-1U-32-MPO-DP-SD 지침서
{카테고리_이름} CommScope 360G2-iP-1U-32-MPO-DP-SD에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. CommScope 360G2-iP-1U-32-MPO-DP-SD 9 페이지. Fiber sliding shelf distribution panel
페이지 인쇄
860538982
Issue 6, June 2014
www.commscope.com
SYSTIMAX 360
MPO Distribution Panel Instructions
General
™
The SYSTIMAX 360
polycarbonate top cover. This sliding distribution shelf includes iPatch MPO kits designed for use in an iPatch
System and MPO adapters that allow connection of multi-fiber trunk cables terminated with push-on MPO
connectors.
These shelves mount in a standard 19-inch (483mm) rack with universal hole spacing. These shelves are
intended for indoor use, but may be used outdoors in a suitable enclosure.
Note: To use the SYSTIMAX 360 iPatch shelf in an existing iPatch System, the iPatch Rack and Panel
Managers must be running firmware version 8.1 or later and the imVision
version 10.1 or later. The System Manager firmware, used to manage the system, must be version 7.1 or later.
We recommend that you upgrade the System Manager software to version 7.1 or a later version before you
install the shelf.
Ordering information is listed below:
Material ID
360G2-iP-1U-32-MPO-DP-SD
760169144
760169185
360G2-iP-2U-64-MPO-DP-SD
1U MPO Distribution Panel
This product is covered by one or more of the following U.S. patents or their foreign equivalents:
5,923,807, 6,245,998. The iPatch System is covered by U.S. patents 6,285,293, 6,522,737 and 8,344,900
™
iPatch
360G2 shelf comes equipped with iPatch
Part No.
™
SYSTIMAX 360
iPatch
© 2014 CommScope, Inc. All rights reserved
®
G2 Fiber Sliding Shelf,
®
MPO kits, jumper-storage trough, and
®
Description
360G2 iPatch 1U 32-MPO distribution panel, sliding shelf
360G2 iPatch 2U 64-MPO distribution panel, sliding shelf
2U MPO Distribution Panel
®
G2 MPO Fiber Sliding Shelves
Controller must be running firmware
Page 1 of 9