Carmanah MX Series 교체 매뉴얼 - 페이지 2
{카테고리_이름} Carmanah MX Series에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah MX Series 4 페이지. Radar detection kit
Carmanah MX Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 교체 매뉴얼 (4 페이지), 교체 매뉴얼 (2 페이지), 교체 매뉴얼 (2 페이지), 설치 매뉴얼 (20 페이지)
페이지 인쇄1.0 MX 300 Cabinet Door Replacement
1. AC only: remove green grounding wire ring terminal at bottom of cabinet door.
2. Drill out three rivets securing door hinge to cabinet using a 0.191" drill bit, and remove door.
3. Ensure all rivets have been cleared from mounting holes and all metal debris has been removed from MX
300 cabinet.
4. Align hinge holes on replacement door with holes on cabinet and fasten with three rivets provided. Ensure
rivets protrude completely through cabinet before riveting.
5. Reconnect green grounding ring terminal if removed.
6. Reapply power to system.
Ensure door is fully closed and locked. Failure to follow these steps can result in the door not fully
closing and latching. This can result in the door staying ajar and possible damage or injury resulting
in door hinge rivets failing.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
MX 300 & 400 CABINET DOOR KIT REPLACEMENT GUIDE
LEVEL 4
2
|
carmanah.com