Carmanah MX Series 설치 매뉴얼 - 페이지 17
{카테고리_이름} Carmanah MX Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah MX Series 20 페이지. Radar detection kit
Carmanah MX Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 교체 매뉴얼 (4 페이지), 교체 매뉴얼 (2 페이지), 교체 매뉴얼 (4 페이지), 교체 매뉴얼 (2 페이지)
페이지 인쇄Collecting Data
Once you have the radar settings configured and the system is deployed it is recommended to erase any
collected data. Click on "Erase Radar Data" and then "OK."
Allow the system to collect data for a minimum of five minutes, or the time value set for the stats interval. This is
when you can test the system by driving through the wrong-way zone. The longer the collection time, the richer
the data will become.
Retrieving Data
Once you have enough runtime on the system, connect to the radar as in
1. Click on Read Traffic Stats From Radar to download the data. Click on Save and then Yes to save into a
project.
2. Create a new project on the left-hand side and drag over the data into the project and then click Import.
If you have successfully downloaded the data you can click on "Erase Radar Data" to start
collecting new data.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
RADAR DETECTION KIT INSTALL GUIDE
Section
4.1.
|
carmanah.com
LEVEL 4
17