Carmanah R820-G 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Carmanah R820-G에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R820-G 16 페이지. Cabinet-based systems
Carmanah R820-G에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 캐비닛 도어 교체 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 매뉴얼 (10 페이지), 설치 매뉴얼 (14 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지)
페이지 인쇄
1.1 Safety Precautions
ELECTRICAL SHOCK HAZARD. DO NOT LET THE BATTERY TERMINALS COME INTO
CONTACT WITH ANY EXPOSED METAL.
Product can have sharp edges. Accidental movement of hinged components can cause injury.
Batteries are shipped fully charged. Use extreme caution when handling the batteries as they can
generate hazardous short-circuit currents. Remove all jewelry (bracelets, metal-strap watches,
etc.) before handling the batteries.
Solar panels produce DC electricity when exposed to light and can therefore produce an
electrical shock or burn. To render solar panels inoperative, remove them from sunlight or fully
cover their front surface with an opaque material.
Before lifting any heavy or bulky equipment, ensure the load is secured so moving parts do not
shift, and that it can be lifted as far as needed without back strain or loss of grip. Installation may
require more than one person.
Ensure the equipment is not powered during installation and wiring of the system.
Recheck all completed wiring for proper polarity prior to energizing the system.
Perform all installation, wiring, grounding and maintenance in conformance with local building and
electrical codes. Adherence to the National Electrical Code (NEC) is mandatory to comply with
any certification markings. Non-adherence to code may void the warranty.
Changes or modifications to Carmanah equipment not expressly approved by Carmanah could
void both the user's authority to operate the equipment and the warranty.
Make sure the installation location has an unobstructed view of the sun's path. Obstructions such
as trees or buildings could significantly reduce the amount of sunlight on the solar panel. Shade
analysis is highly recommended to understand how shadows will change according to the time of
year. Contact Carmanah for a detailed examination and solar simulations for your site.
This quick start guide is not a replacement for the complete product user manual.
Visit carmanah.com to download the complete product user manual.
2.1
Tools and Materials Required
The following tools and materials may be required to mount your Carmanah flashing beacon depending on the G
Series model and configuration:
a. Imperial socket set
b. Crescent wrench
c. Tap set
d. Imperial Allen-Wrench set
e. Fish tape
f.
Level
g. Compass or pre-determined equatorial
direction
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
G SERIES QUICK START GUIDE
h. Drill and drill bits
i.
Fine-tip felt marker
j.
Multi-bit screwdriver
k. Pelco Roger-Wrench (Optional)
l.
Ladder or lift device
m. Lithium grease
n. Electrical Multi-meter (Optional)
2
|
carmanah.com