Forms + Surfaces COPENHAGEN 설치 지침 - 페이지 2
{카테고리_이름} Forms + Surfaces COPENHAGEN에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Forms + Surfaces COPENHAGEN 2 페이지. Bench
페이지 인쇄COPENHAGEN
STEP BY STEP
• Position bench so that mounting holes
line up with anchors.
T 800.451.0410 | www.forms-surfaces.com
© 2012 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
BENCH
TM
b
c
d
e
Attach bench
• Slide 3/8" stainless steel lock washer (c),
then 3/8" stainless steel flat washer (d)
and 3/8" nylon flat washer (e) onto each
3/8"-16 x 1" tamper-resistant button
head cap screw (b).
• Insert screws into mounting holes in
bench and thread into anchors using
provided 7/32" hex bit for tamper-
resistant screws.
SURFACE MOUNT INSTALLATION INSTRUCTIONS
b
c
d
e
Tighten screws
• Tighten screws until snug.
page 2 of 2 | Rev. 12-17-12