AND UT-801 사용 설명서 - 페이지 13

{카테고리_이름} AND UT-801에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AND UT-801 19 페이지. Multi-function infrared thermometer

Care & Maintenance

▢ After measurement, please use a cotton swab with alcohol (70% concentration) to clean the lens (on the inside of the probe).

▢ Allow the probe to fully dry for at least several minutes. Then reattach the cap.

▢ This device should be stored at a temperature between -20 to +50°C and humidity 85% or less.

▢ Keep this device dry and away from any liquids and direct sunlight.

▢ The probe should not be submerged into liquids.

NOTES

▢ The probe is the most delicate part of the thermometer. Use with care when cleaning the lens to avoid damage.

▢ Please check the device for damage if it is dropped. If you are unsure how to, please send the complete device to the nearest retailer

for recalibration.

▢ Holding the thermometer too long may cause a higher ambient temperature reading of the probe. This could make body temperature

measurement lower than usual.

English 12