AND UT-801 사용 설명서 - 페이지 9
{카테고리_이름} AND UT-801에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AND UT-801 19 페이지. Multi-function infrared thermometer
Measurement
1. Always make sure the probe is clean and undamaged.
2. Power on: Press the "ON/MEM" button.
3. Mode selection:
● Ear mode:
Press the "ON/MEM" button, the default mode of thermometer is ear mode. The thermometer is can be used after
you see the ear icon on the display and hear two beep sounds. In this mode, you can measure the body
temperature by ear measurement.
● Forehead mode: After power on, press and hold the "ON/MEM" button, and press the "SCAN" button one time for forehead mode.
The forehead icon will display and you will hear two beeps. In this mode, you can measure the body temperature
by forehead measurement.
● Surface mode:
After power on, press and hold the "ON/MEM" button, and press the "SCAN" button one time for surface mode.
The surface icon will display. In this mode, you can measure surface temperature of an object.
4. Measuring temperature:
Ear temperature measuring. Points for attention:
(1) Gently pull the ear back to straighten the ear canal and snugly position the probe into the ear canal,
aiming towards the membrane of the eardrum to obtain an accurate reading.
(2) Press and hold the "SCAN" button until you hear a beep sound. Remove the probe from the ear and
read the temperature measurement on the LCD.
English 8
Pull
Scan