Dreame Vortech Z10 Station 사용자 설명서 - 페이지 11

{카테고리_이름} Dreame Vortech Z10 Station에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dreame Vortech Z10 Station 13 페이지.

페이지 인쇄

How to Use

Starting Dust Collection

1. Place the dust-removal hub near a

power outlet and put the plug into it.

2. Place the vacuum on the dust-removal

hub (the vent of the dust cup should be

aligned with that of the dust-removal

hub).

3. Press the dust collection button.

Fig. D-5

Note:

• The dust collection process cannot be

stopped by pressing the dust collection

button.

• If the dust collection bag reaches

capacity or the air duct is blocked during

the dust collection process, the dust-

removal hub will stop working after the

process is completed and cannot collect

dust again.

Using Different Accessories

Multi-Surface Brush

Note:

• The multi-surface brush can be attached

directly to the vacuum.

• When the appliance starts, the

lights in front of the brush roller

will automatically turn on, which is

convenient for use.

When using on baby play mats, carpets

or for vacuuming coffee beans, pop corn

and other pellets, turn on the switch on

the brush.

When vacuuming on tiles, wooden

floors or other hard surfaces, turn off the

switch.

Fig. D-6

Soft Roller Brush

Suitable for cleaning hard floors such as

marble and tile.

Fig. D-7

Motorized Mini-Brush

For vacuuming dirt, pet hair, and other

stubborn debris from sofas, bedding, and

other fabric surfaces.

Note: It is not recommended to vacuum

on fragile surfaces, such as silk.

Fig. D-8

Soft Dusting Brush

Suitable for vacuuming on LCDs, keyboards,

lampshades, curtains, shutters and other

surfaces of fragile objects.

Fig. D-9

Combination Tool

Suitable for vacuuming cracks, corners of

doors and windows, stairs, and other hard-

to-reach places.

Fig. D-10

Accessory Mount

The soft dusting brush, combination tool

and motorized mini-brush can be placed

on the accessory mount when not in use.

Fig. D-11

Note:

• If any rotating part becomes stuck, the

vacuum may shut off automatically.

Remove any trapped foreign objects,

then resume use.

• When the battery becomes overheated,

the vacuum will automatically shut

off. Wait until the battery temperature

returns to normal, then resume use.

Care & Maintenance

Tips:

• Always use genuine parts to keep your

warranty from being void.

• If the filter or nozzle becomes clogged,

the vacuum will stop working shortly

after being turned on. Clear the tube to

restore functionality.

• Before cleaning the dust cup, please

confirm that the plug is disconnected

and keep the vacuum's power button in

the off position.

• If the vacuum is not used for an extended

period, fully charge it, unplug the power

cord, remove the battery, and store it

in a cool, low-humidity environment

away from direct sunlight. To avoid over-

discharging the battery, recharge the

battery at least once every three months.

Cleaning the Vacuum

Wipe the vacuum with a soft dry cloth.

Cleaning the Dust Cup, Pre-

Filter, and Cyclone Assembly

1. Press the dust cup release button and

remove it from the vacuum.

2. Remove the pre-filter first, and then

rotate the cyclone system to lift it out.

3. Rinse the cyclone assembly, pre-filter,

and dust cup until they are clean. After

washing, air dry for at least 24 hours.

Fig. E-1-Fig. E-3

Note:

• Please clean the dust cup as needed.

• It is recommended to clean the cyclone

system and pre-filter at least once every

3 to 4 months.

Installing the Dust Cup, Pre-

Filter, and Cyclone Assembly

1. Install the cyclone assembly and pre-

filter into the dust cup.

2. Slightly tilt the dust cup so the slot

aligns with the clip on the vacuum. Then

gently push the dust cup until it clicks

into place.

Fig. E-4-Fig. E-5

Cleaning the Filter

It is recommended to clean the filter

once every 4 to 6 months.

1. Remove the dust cup as shown in the

figure.

2. Remove the filter from the vacuum by

pulling it down in the direction shown in

the figure.

3.Rinse the filter with rotating it 360° .

Lightly tap the filter several times to

remove any debris caught in it.

4. Allow the filter to air dry for 24 hours.

Fig. E-6-Fig. E-9

Note:

• Only use clean water to wash the filter.

Do not use detergent.

• Do not attempt to clean the filter with a

brush or finger.

Installing the filter

1. Insert the filter into the vacuum and

gently press down, as illustrated.

2. Reinstall the dust cup.

Fig. E-10-Fig. E-11

Replace the dust collection bag

When the dust collection status indicator

blinks orange, it means that the dust

collection bag reaches capacity and needs

to be replaced with a new one.

1. Take off the dust-removal hub cover.

2. Pull out the dust collection bag and

discard it.

Note: Pulling outwards on the handle of

the dust collection bag will seal the bag to

prevent the dust and debris from accidentally

falling out.

3. When the filter is dirty, rinse it with

water. Then place it in a well-ventilated

place for at least 24 hours to make sure

it is thoroughly dry.

4. Install a new dust collection bag by

inserting the bag handle into the card

slot.

5. Install back the dust-removal hub cover.

Fig. E-12-Fig. E-16

Note: It is recommended to replace the

dust collection bag every two months. If the

dust collection bag reaches capacity, the

indicator blinks orange.