ATI Audio AT5XXNC 소유자 매뉴얼 - 페이지 10
{카테고리_이름} ATI Audio AT5XXNC에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Audio AT5XXNC 12 페이지. Class d 2 to 8-channel power amplifier
페이지 인쇄
Appendix A Troubleshooting Guide
If the amplifier should function abnormally during operation, please review the items in the following checklist. Please be sure to
thoroughly check all other connected components such as speakers and preamplifiers, as well as cables. If the problem persists,
please consult your dealer or distributor.
Symptom
No power or front pan-
el lights and no sound.
No power or front pan-
el lights and no sound.
No audio output.
Warm
Hot
Possible Cause(s)
The power cable is not inserted 100% into
AC input connector.
Circuit breaker is open (AC outlet).
Overheating, DC at output, Catastrophic
failure
Normal operation
Normal operation
Remedy
Ensure that the AC cord is fully inserted into
the amplifier and that the wall outlet is ac-
tive.
Check the AC outlet circuit breaker and re-
set, if necessary, or contact your dealer.
The amplifier will turn off. For any but a
catastrophic failure, the amplifier can be
reset by removing the fault and completing
the turn-on sequence again.
5