ATI Audio MCDA-208 운영 및 유지보수 매뉴얼 - 페이지 9

{카테고리_이름} ATI Audio MCDA-208에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Audio MCDA-208 15 페이지. Ultra-low-jitter studio master clock dual 1x4 aes/ebu distribution amplifier

페이지 인쇄

AES SYNC IN

Provides a balanced, transformer isolated 110 ohm AES Sync input that a derived Word Clock

may be routed to XLR Outputs 1 through 4, Outputs 5 through 8 or BNC Outputs 1 through 6 via

the configuration DIP switches. A Frame Clock is derived from this input. When present, this

signal provides first priority for synchronizing the internal Clock Generator when CLOCK

SOURCE SET is set to BY PRIORITY.

AES LOOP-THRU

Provides a convenient loop-thru port for the AES External Sync input. When looping this signal

to another device, set Input Termination to Off.

WORD CLOCK INPUT

Provides an isolated high impedance or 75 ohm Word Clock input to synchronize the internal

Clock Generator. It may be routed to XLR Outputs 1 through 4, Outputs 5 through 8 and/or BNC

Outputs 1 through 6 via the configuration DIP switches. When present, this signal provides the

second priority for synchronizing the internal Clock Generator when CLOCK SOURCE SET is

set to BY PRIORITY.

WORD CLOCK LOOP-THRU

Provides a convenient loop-thru port for the Word Clock input. When looping this signal to

another device, set Input Termination to Off.

CONFIGURATION DIP SWITCHES

Provides routing and other selections for signal flow in the unit. See the DIP Switch Routing

Table for settings:

The switches are labeled left to right BANK A switch "1" is "DIP Switch 1 in the following tables.

DIP Switches 7 through 12 have no function in the MCDA-208/DA106. In this view Outputs 1-4

are connected to input 1. OUTPUT 5 to 8 are connected to Word Clock generated by the

WORD CLOCK INPUT. The WCLK OUT 1 through 6 are connected the internal clock

generator.

"#$%&'()!"*+,*-!