ATI Audio MCDA-208/WC106 운영 및 유지보수 매뉴얼 - 페이지 3

{카테고리_이름} ATI Audio MCDA-208/WC106에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Audio MCDA-208/WC106 13 페이지. Ultra-low-jitter studio master clock with dual 1x4 aes/ebu distribution amplifier and 1x6 clock distribution amplifier

페이지 인쇄

SAFETY INFORMATION

To reduce risk of electric shock, do not remove covers. There are no user-serviceable items inside.

Please refer servicing to qualified personnel.

UNPACKING

Examine all shipping cartons for external damage and retain all damaged cartons for inspection by the

carrier. Examine all equipment for any sign of damage. Do not connect AC mains power to a unit which

appears to be damaged. Contact the carrier to file a damage claim.

INSTALLATION LOCATION

This equipment must be installed in a location meeting the environmental conditions specified below.

Adequate cooling must be provided if units are to be operated in high temperature locations. Exposure

to liquid and condensation must be avoided.

GROUNDING

This equipment is connected to earth through the center conductor of the AC mains cable. Proper

grounding protects operators from electric shock, and it must be maintained whenever the unit is

connected to AC.

ELECTROMAGNETIC COMPATIBILITY

This unit complies with electromagnetic requirements described in EMC Directive 2004/108/EC and

FCC Part 15. This unit does not generate undue electromagnetic interference, and is adequately

protected against electromagnetic interference so that it can operate properly.

MAINTENANCE

This unit requires no maintenance other than periodic wiping with a soft dry cloth to remove any dust or

contaminating substances. Do not use solvents for cleaning.

DECLARATIONS OF CONFORMITY

Class A Equipment – FCC Notice

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to FCC CFR 47, Part 15.

CE Declaration of Conformity

ATI Audio Inc., West Berlin, New Jersey 08091 USA, declares that all Model MCDA-208/WC106 units

are in conformity with the following EU regulations and amendments:

Low Voltage Directive (LVD) 2006/95/EC (replaces 73/23/EEC)

Electromagnetic Compatibility (EMC): EMC Directive 2004/108/EC

EMC: EN55103-1/-2:2009, electromagnetic environments E2.

Safety: EN 60950:2006

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

MCDA‐208/WC106 Manual