Carmanah EG340 사용자 설명서 - 페이지 11
{카테고리_이름} Carmanah EG340에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah EG340 16 페이지. Eg-series
Carmanah EG340에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)
Symptom
Green light off...
Red light on...
Red light flashing...
Red light on...
All 3 lights (1 green, 2 reds) pulsing...
Can't program with programmer...
Can't program with programmer...
© 2012, Carmanah Technologies Corporation. 63966_EG_Series_UserManual_RevB
Circumstances
... at all times
... during the night
... during the night
... during the night
...during programming
...during the day
...at night
EG-SERIES USER MANUAL
Possible Cause
(solution)
Blown battery fuse (check fixture & battery wiring,
replace battery fuse)
Battery wiring problem (check battery wiring)
Dead batteries due to incorrect EMS programming,
solar panel shading, or battery wear-out (check
programmer knob/switch settings, reprogram EMS)
EMS senses that fixture voltage too high or low (check
fixture wiring)
EMS senses that fixture current is too high (check
fixture wiring)
Battery low-voltage condition due to incorrect EMS
programming, solar panel shading, or battery wear-out
(check programmer knob/switch settings, reprogram
EMS)
This is normal behaviour.
Sunlight interfering with communications (get closer to
EMS, aim carefully at EMS, try again later in the day)
Programmer batteries dead (replace AA batteries)
Programmer not aimed at EMS IR transmitter/receiver
(aim carefully)
Blown EG-series battery fuse (check wiring, replace
battery fuse)
tRoUbLEShootING
11