Carmanah G Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} Carmanah G Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah G Series 14 페이지. Rrfb mast arm kit
Carmanah G Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 캐비닛 도어 교체 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 사용자 설명서 (18 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지), 설치 매뉴얼 (18 페이지)

2.0 System Components

The G Series Applied Information (AI) Integration Kit consists of the following items:

1. Harness, AI 16-pin to terminal block (1)

2. Door switch and harness, G Series cabinet (1)

3. Adapter, 90°, SMA male to SMA female (2)

4. Screw, security, pin-in hex, #10-32 x 0.5" (2)

5. Screw, machine, #8-32 x 3/8", Phillips (4)

6. Screw, machine, #10-32 x 3/8", Phillips (2)

7. Washer, flat, #10 (4)

The following tools and materials may be required to install the AI Integration Kit into your G Series system:

1. Drill and ½" drill bit

2. Deburring tool or similar

3. Crescent wrench

4. Side cutters

5. Multi-bit screwdriver

6. Electrical multimeter

Door Switch (optional):

1. Loctite 220 threadlocker or similar

2. ANSI #9 drill bit (0.196" diameter)

3. 5/32" tamper-resistant hex screwdriver bit

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

8. Washer, lock, #10 (2)

9. Standoff, #10-32 x 5/8", female, aluminum (2)

10. Tie mount, push barb (2)

11. Cable tie, mounting base, ¾ x ¾" (3)

12. Cable tie, 4" (10)

13. Cable tie, 7", #8 screw mount (1)

14. Install guide, AI Integration Kit, G Series (1)

INSTALL GUIDE

carmanah.com