Carmanah R247-E 사용자 설명서 - 페이지 2

{카테고리_이름} Carmanah R247-E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R247-E 20 페이지. 24 hour flashing beacon
Carmanah R247-E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 설치 매뉴얼 (20 페이지)

페이지 인쇄
Carmanah R247-E 사용자 설명서

Warnings and Precautions

The following symbols indicate important safety
warnings and precautions throughout this manual.
They are defi ned as follows:
WARNING indicates that serious
bodily harm or death may result
WARNI
RNING
from failure to adhere to the
precautions.
CAUTION indicates that damage
to equipment may result if the
instructions are not followed.
CAUTION
AUTION
NOTE suggests optimal conditions
NOTE
OTE
under which the equipment will
operate effectively and safely, or
provides additional information to
the reader.

Warranty Disclaimer

This manual will familiarize you with the features,
operation standards, and installation of Carmanah's
R247-E 24 Hour Flashing Beacon. Failure to comply
with the use, storage, maintenance, installation or
placement instructions detailed in this manual could
void the warranty.

Standards

Perform all installation, wiring and maintenance in
conformance with local building and electrical codes.
Adherence to the National Electrical Code (NEC) is
mandatory to comply with any certifi cation markings.
Non-adherence to code may void the warranty.
2
R247-E 24 HOUR FLASHING BEACON USER MANUAL

Safety and Usage Precautions

WARNI
RNING
© 2014, Carmanah Technologies Corporation. 72466_R247-E_UserManual_RevA
WARNINGS AND PRECAUTIONS
Batteries are shipped fully-charged.
Use extreme caution when handling
the batteries as they are capable
of generating hazardous short-
circuit currents. Remove all jewelry
(bracelets, metal-strap watches,
etc.) before attempting to handle the
batteries.
Solar panels produce DC electricity
when exposed to light and can,
therefore, produce an electrical
shock or burn. To render solar
panels inoperative, remove them
from sunlight, or fully cover their
front surface with an opaque
material.
Before lifting any heavy or bulky
equipment, ensure that the load is
secured so that moving parts do
not shift and it can be lifted as far
as needed without back strain or
loss of grip. Installation may require
more than one person.
Ensure the equipment is not
powered during installation and
wiring of the system.
Re-check all completed wiring for
proper polarity prior to energizing
the system.
System must not be operated on
one battery.