Carmanah R820-G 설치 매뉴얼 - 페이지 12

{카테고리_이름} Carmanah R820-G에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R820-G 14 페이지. Cabinet-based systems
Carmanah R820-G에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 캐비닛 도어 교체 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지)

4.4

Testing AI FCU

1. Ensure AI serial number has been activated.

2. For SC315-G or R820 systems set toggle switch to "OFF". In all other cases set to "AUTO".

3. Ensure connector is properly mated on the bottom of the AI FCU.

4. Confirm correct wiring and power-up system by connecting the DC power (system fuses or switching on

breaker) and turning on the AI power switch.

5. On your PC, open a browser and navigate to the Glance website:

glance.appinfoinc.com

6. Log in using the credentials provided by AI or the distributor you purchased the equipment from.

7. On the upper left side of the browser, select the device name that matches the Device ID (the ID number

labelled on the AI FCU).

Ensure the equipment is not powering during installation. Recheck all wiring prior to energizing

the system.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com