FORMUFIT External Adjustable Elbow 제품 지침

{카테고리_이름} FORMUFIT External Adjustable Elbow에 대한 제품 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. FORMUFIT External Adjustable Elbow 2 페이지.

PRODUCT INSTRUCTIONS

External Adjustable Elbow

FORMUFIT External Adjustable Elbows connect two (2) segments of PVC Pipe and adjusts to

any angle between 90° and 270°. To connect this product to PVC pipe, follow the instructions

shown below.

Assembly

Line up and insert one end of a PVC

Pipe inside of one socket of the

adjustable elbow.

Securing

For permanent and strong connections, it is recommended to use PVC cement/solvent to

attach the PVC pipe and the adjustable elbow.

You can also temporarily connect ﬁtting by driving a self-tapping screw where the pipe and

cap meet, or apply electrical tape over the end of the PVC pipe prior to insertion for a

temporary, yet strong connection.

, ®

Push or tap into place until the pipe is

fully seated. Repeat for the next pipe

segment on the opposite side of the

ﬁtting.

https://formuﬁt.com