Carmanah R820-G 매뉴얼 - 페이지 7

{카테고리_이름} Carmanah R820-G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R820-G 10 페이지. Cabinet-based systems
Carmanah R820-G에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 캐비닛 도어 교체 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 매뉴얼 (10 페이지), 설치 매뉴얼 (14 페이지), 매뉴얼 (10 페이지)

3. Remove the AC input wires from the terminal blocks (line, neutral, and ground). Cap them off with wire

nuts one at a time. Ensure the wires are not live before proceeding forward.

4. Remove the four screws securing the AC backplane and remove from the cabinet.

5. Remove ground wire from the bus bar:

a. If you have the optional Polara XAV push button controller installed on the left side of the cabinet,

disconnect the ground wire from the bus bar and secure it to one of the nearest grounding

screws. It is recommended to terminate with a ring terminal.

b. If you do not have the optional Polara XAV push button, remove the ground wire from the system.

There will be a ground wire that remains from the cabinet door to the inner cabinet.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

AC TO SOLAR RETROFIT GUIDE

carmanah.com