Formula R1 Racing 운영 매뉴얼 - 페이지 7

{카테고리_이름} Formula R1 Racing에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formula R1 Racing 20 페이지.

ASSEMBLY

1.1

WARNING! DO NOT TRY TO DISASSEMBLE OR ATTEMPT TO MODIFY THIS NEW

FORMULA SRL PRODUCT!

Service on this product must be performed only by qualified professional me-

chanics who are familar with and understand the technical details of how this

product works.

If you decide to ignore this important safety warning, you are doing so at your

own risk and at no legal liability to FORMULA SRL or its distributors.

WARNING: Consult THE SAFETY REGULATIONS found in this manual (pp. 16-17-18).

CAUTION: For disc installation, use a dynamometric (Torque) wrench suitable for the

given tightening torque.

WARNING: Ensure the disc rotor isn't hot before working on it by letting it sit for a mini-

mum of 10-15 minutes. Let it cool if necessary.

CAUTION: When removing the screws, always make sure to reapply medium strength

Loctite® and ensure the torque settings are correct by using a torque wrench.

The range of FORMULA disc brakes includes the following

models:

Place brake disc 1 (with the markings facing outwards) on

hub 2 of an assembled wheel. Make sure the arrow on the

disc indicates the correct direction of rotation. Tighten the 6

screws supplied 3 with a TORX® T25 bit/tool. Tighten the

6 screws in a star pattern to a torque setting of 6 Nm±5%.

Carefully clean the disc with isopropyl alcohol to remove

any traces of grease or oil. Mount the wheel and secure with

the original fasteners.

Place brake disc 1 (with the markings facing outwards) on

hub 2 of an assembled wheel. Make sure the arrow 4 on

the disc flange indicates the correct direction of rotation.

Tighten the 6 MS screws 3 supplied with a TORX

tool. Tighten the 6 screws in a star pattern to a torque setting

of 6 Nm±5%. Carefully clean the disc with isopropyl alcohol

to remove any traces of grease or oil. Mount the wheel and

secure with the original fasteners.

T25 bit/