Formula TECH SUSPENSION TJ2 사용자 설명서 - 페이지 9

{카테고리_이름} Formula TECH SUSPENSION TJ2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Formula TECH SUSPENSION TJ2 14 페이지. Shock absorber

Spring Adjustment & Replacement

Required tools:

Bench vise, Formula Grease, Hex key 2,5 mm.

Procedure:

1. Remove the uniball spacers (100). Check the state of spacers and dust seals before proceeding. Place the shock

absorber in a bench vise with plastic jaws to prevent damage. Measure and track the preload spring;

2. Unscrew the preload ring grub screws (94) and unscrew the spring regulation ring (8) until the spring is moving

freely;

3. Disassembly the rebound knob (87) by unscrewing its screw with a 2,5 mm hex key;

4. Remove the seeger ring (14) and the ring spring support (15);

5. Extract the shock absorber's spring (20), the preload spacer (61) and the washer spring (40);

6. Clean the shock absorber with isopropyl alcohol and ensure there are no oil leaks or damages. Get in touch with

customer support if there are anomalies;