CommScope FOSC-450-BS 설치 지침 - 페이지 4

{카테고리_이름} CommScope FOSC-450-BS에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CommScope FOSC-450-BS 16 페이지. Fiber optic splice closure

Central core cable

4.1.2

Make a window cut of 4.2 m, cut away the strength member

at a distance of 35 mm from the outer jacket. Cut the inner jacket at 90

mm from the outer jacket.

4.2

Drop cable preparation

Loose tube cable

4.2.1

Remove the jacket over a length of 1.4 m , cut the strength

member at a distance of 50 mm from the outer jacket.

4.2.2

Strip the loose tube at a distance of 55 mm from the outer

jacket, remove and degrease fiber bundle.

Central core cable

4.2.3

Remove the jacket over a length of 1.4 m, cut the strength

members at a distance of 35 mm from the outer jacket. Cut the inner

jacket at 90 mm from the outer jacket.

Modular cable

4.2.4

Remove the jacket over a length of 1,4 m, cut the strength

member at a distance of 40 mm from the outer jacket.

50 mm

4.3

Cable + strength member termination for drop and looped

cable

Loose tube cable

4.3.1

When the cable has many loose tubes, one can use the single

bracket. You can use the single bracket when the cable has many loose

tubes.

4.3.2

Install the strength member termination plate.

4.3.3

Tighten the screw.