Carmanah E Series 사용자 설명서 - 페이지 7
{카테고리_이름} Carmanah E Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah E Series 18 페이지. Rrfb mast arm kit
Carmanah E Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 설치 매뉴얼 (16 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 설치 매뉴얼 (20 페이지), 교체 매뉴얼 (9 페이지), 설치 매뉴얼 (18 페이지)
4.3
Drill Holes for Radar Cable and Mount Through Bolts
If routing the radar cable inside the pole, drill a 5/8" hole (16 mm) in the center of where the radar mount will
attach to the pole. If through-bolting the radar mount, drill two 7/16" (11 mm) holes above and below as shown,
through both sides of the pole.
4.4
Fish Radar Cable, Install Radar & Mount to Pole
Install the radar module into the mount saddle with the cable facing down and fasten with the supplied spacers,
washers and screws as shown. Fish the radar cable through the mount, into the pole and up or down to the
Carmanah E/F/G system. Bolt or band the radar mount to the pole.
Install the radar module with its cable facing down to optimize both detection range and
resistance to water ingress.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
RADAR DETECTION KIT
|
carmanah.com
7