Carmanah R247-E 사용자 설명서 - 페이지 5

{카테고리_이름} Carmanah R247-E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R247-E 20 페이지. 24 hour flashing beacon
Carmanah R247-E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 설치 매뉴얼 (20 페이지)

페이지 인쇄

WARNING Batteries are

shipped fully-charged.

WARNI

RNING

Use extreme caution

when handling the

batteries as they are

capable of generating

hazardous short-circuit

currents. Remove all

jewelry (bracelets,

metal-strap watches,

etc.) before attempting to

handle the batteries.

CAUTION Consult with

Carmanah customer

service before making

CAUTION

AUTION

adjustments to the

system. Improper

system adjustment

may reduce operational

effectiveness, reduce

battery life, or void the

warranty.

R247-E 24 HOUR FLASHING BEACON USER MANUAL

Installation

Summary

Basic steps to install a R247-E solar engine:

1. Connect the post mount to the post.

2. Mount the solar engine and signal head assembly

onto the post and aim the signal head as desired.

3. Tighten the nipple to secure the signal head as

required.

4. Rotate the solar engine to ensure the solar panel

is facing south and tighten the nut as required.

5. Connect the batteries to the wiring harness and

place the batteries into the solar engine with the

terminals to the bottom and facing out. Take care

not to short the battery terminals to the metal

chassis.

6. Secure the batteries with the battery strap. Note

the proper routing (reference page 11).

7. The EMS will be pre-conﬁ gured at the factory.

Use the onboard interface to check the system

status and conﬁ guration, or to make adjustments if

necessary.

8. Close the solar engine and secure solar panel with

fastener.

INSTALLATION