DreamGEAR PS3 Lava Glow Wireless Controller 운영 매뉴얼

{카테고리_이름} DreamGEAR PS3 Lava Glow Wireless Controller에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DreamGEAR PS3 Lava Glow Wireless Controller 2 페이지.

PS3 Lava Glow Wireless Controller

Contents:

PS3 Lava Glow Wireless Controller

PS3 Lava Glow Wireless Receiver

Operation:

1. Open the battery compartment located on the bottom of the PS3 Lava Glow Wireless controller.

Insert 3 x "AAA" batteries

2. The PS3 Lava Glow Wireless controller feathers a 3 position power switch located on the bottom

side of the controller

OFF=The controller is powered "OFF";

LED OFF(middle Setting)=This setting allows you to have full use of the controller without

the internal LED's being "ON";

ON LED=The controller and LED's are powered "ON".

3. With your PlayStation 3 ® game console powered "ON", plug the PS3 Lava Glow Wireless

Receiver into controller port #1 (or other, if using multiple controllers) of your game console. LED

will begin to flash slowly. Press the "CONNECT" button on the receiver,(the LED will flash rapidly)

4. Press the "MENU" button on the PS3 Lava Glow Wireless Controller, the four (4) channel

indicators flash rapidly; Press "MENU" button again to enter an operation channel, the

corresponding channel indicator(s) will become solid, and the receivers LED as well. You are now

ready to enjoy your new PS3 Lava Glow Wireless Controller.

5. Hold the "MENU" button for Three (3) seconds to enter main menu of PlayStation 3® game

console.

6. When connecting multiple controllers, connect each controller separately. First connect player

one's controller and than connect the remaining controllers. The channel indicator(s) displaying

as below:

Channel 1=Indicator one (1) lights up

Channel 2=Indicator two (2) lights up

Channel 3=Indicator three (3) lights up

Channel 4=Indicator four (4) lights up

Channel 5=Indicator one (1) + four (4) lights up

Channel 6=Indicator two (2) + four (4) lights up

Channel 7=Indicator three (3) + four (4) lights up

TURBO Programming:

Press any action button and "TURBO" button at same time to set the button with the TURBO function.

Do it again to cancel TURBO function.