Andatech ALX3000 사용자 설명서 - 페이지 5

{카테고리_이름} Andatech ALX3000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andatech ALX3000 20 페이지. Ignition interlock

페이지 인쇄
Andatech ALX3000 사용자 설명서
Calibration error
Calibration
error 1
Analysing time is over
Calibration
60 seconds during
error 2
calibration.
Too many violations have
Violation reset
been detected
The sampling process
Violation 2
was not successful
The temperature of the
Low temp.
handset is too low
The temperature of the
High temp.
handset is too high
System error
Err X
Communication problem
No display
between the handset and
message on the
control unit
handset display
Override lockout ALX3000 is lock after
override.
On override
Override period
??:??:??
Request for retest.
Retest required
in 03:00
Lockout when the breath
Temporary
sample is over the set
Lockout: ??:??
limit value or frequent
FLOW error.
Out of memory in the
Memory over
control box.
Service required Over service requirement
period.
Over calibration
CAL Required
requirement period.

DRIVER CHANGE

If you wish to perform a new breath test (e.g. at a driver change, please perform the following):
1. Turn off the vehicle - the free start time will be displayed on the device.
2. Hold down both the Menu ("M") and Enter ("U") buttons on the handset for 3 seconds.
3. ALX3000 is then blocked, and will return to standby mode.
4. New startup procedure is now active.
Please contact us at 1300 800 200.
Please contact us at 1300 800 200.
Please contact Andatech at 1300 800 200.
Please re-test with the ALX3000 again.
Detach and take the handset to a moderate
temperature area. Reconnect and perform a
breath test
Detach and take the handset to a moderate
temperature area. Reconnect it and perform a
breath test
Please contact an authorised service center.
Check the plugs of the connecting cable,
unplug it from the handset and reconnect
them. If the issue still persists: call an
authorised service center
Please contact Andatech at 1300 800 200.
Please contact Andatech at 1300 800 200.
Please retest ALX3000 in random or retest
required time.
Please retest ALX3000 after the time shown.
Please contact Andatech at 1300 800 200.
Please contact Andatech at 1300 800 200.
Please contact Andatech at 1300 800 200.
5