Advanced Keys AK-102 설치 매뉴얼 - 페이지 8

{카테고리_이름} Advanced Keys AK-102에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced Keys AK-102 12 페이지. Intelligent keyless entry system

Door Locking System Wiring

About Door Switch

These switches are used to check to see if the doors are open or closed. To

verify the type of door switches for your vehicle, shut off the interior lights

first, then open the driver side's door, keeping the other doors closed; Then

check the voltage, firstly if the voltage is ground and becomes positive

voltage when the door is closed, then it should be negative trigger type.

Conversely, if the voltage is positive with the door open and ground when

closed, then the door should be a positive trigger type. If the system is

positive trigger type, use a flat head screwdriver and carefully pry the

control unit open and change the jumper set in the control unit according

the Wiring Diagram.

Generally, most vehicles have an overall signal wire which will trigger a

signal no matter which door is opened. Some vehicle's doors have separate

signals (one wire per door) therefore it's needed to connect the signal wires

through diodes (Like model: 1N4001) according to the following figures:

Connect to

"Door Switch"

of Control Unit

Driver door

switch

signal Wires

Negative trigger type

Passenger

door switch

signal wires