Formula Air RVA4-NX-06 유지 관리 매뉴얼 - 페이지 9
{카테고리_이름} Formula Air RVA4-NX-06에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formula Air RVA4-NX-06 14 페이지. Rotary valves
페이지 인쇄
Position
Body
1
Bearing housing
2
Cover
3
Rotation disc cover
4
Detector holder
5
Rotation disc
6
Spare parts
Code
JCAB000028
JCAB000001
JCAB000002
JCAB000003
JCAB000004
JCAB000005
JCAB000027
JEBB000001
JEBB000002
JEAA000005
JEAA000006
JCAB000006
JCAB000007
JCAB000008
JCAB000009
JCAB000010
5.
Rotation detector (optional)
The optional rotation detector is a detection system that controls if the rotation disk is turning. In case of rotation
failure, it sends a signal to a control panel.
!
CAUTION
Before any manipulation to the rotary valve, make sure that the motor is stopped and that all electrical
connections are disconnected.
NOTE : all electrical manipulations should be performed by qualified personnel only.
5.1
Placing the rotation detector
Remove the rotation disk protection cover by untightening the bolts holding it on the rotary valve body.
9
User manual | RVA Rotary valves
www.formula-air. com
Description
Position
Bearing for RVA rotary valve (all models)
Set of rubber blades (6 pcs) for RVA1
Set of rubber blades (6 pcs) for RVA2
Set of rubber blades (6 pcs) for RVA3
Set of rubber blades (6 pcs) for RVA4
Set of rubber blades (6 pcs) for RVA5
Felt seals kit for all RVA rotary valve (2 seal rings)
Gearbox for motor 0,37kW
Gearbox for motor 0,55kW
Motor - IE2 - 0,37kW - 4Pole - 230/400V - 50Hz
Motor - IE2 - 0,55kW - 4Pole - 230/400V - 50Hz
Rotor complete with rubber blades RVA1 – NX -06
Rotor complete with rubber blades RVA2 - NX -06
Rotor complete with rubber blades RVA3 - NX -06
Rotor complete with rubber blades RVA4 - NX -06
Rotor complete with rubber blades RVA5 - NX -06
Description
Motor and gear
7
Bolt M5 x 10
8
Rotation detector
9
Rotor and rubber blades
10
Bolts and washers M8
11
Bolts, nuts & washers M8
12
Description