Carmanah G Series 설치 매뉴얼 - 페이지 6

{카테고리_이름} Carmanah G Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah G Series 14 페이지. Rrfb mast arm kit
Carmanah G Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 캐비닛 도어 교체 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 사용자 설명서 (18 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지), 설치 매뉴얼 (18 페이지)

4.0 G Series Cabinet Installation

4.1

1. Remove power to the system. For AC-powered systems, turn off the circuit breaker in the cabinet and for

solar-powered systems remove the battery and solar fuses.

2. Use the indentation in the center of the cabinet to locate the tip of the drill bit. Drill a ½" hole on top of the

enclosure. Deburr hole and remove all aluminum chips.

Ensure the equipment is not powered during installation. Recheck all wiring prior to energizing

the system.

Ensure all metal chips are removed to prevent system damage caused by short circuits.

Ensure that no burrs are present that would prevent the antenna from making a good seal with

the top of the cabinet.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com