ATI Technologies XCLAIM TV 설치 매뉴얼 - 페이지 5
{카테고리_이름} ATI Technologies XCLAIM TV에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies XCLAIM TV 16 페이지.
ATI Technologies XCLAIM TV에 대해서도 마찬가지입니다: 설치 매뉴얼 (15 페이지)
페이지 인쇄Making the Connections
To receive maximum performance and a complete set of
features, connect XCLAIM TV to XCLAIM VR. Optionally,
XCLAIM TV can be connected to a Power Macintosh G3 that
has an Audio/Video option card installed.
!
¥
¥
¥
Connecting XCLAIM TV to your computer
Use the Shut Down command to turn off your computer.
1
Connect the cable TV or antenna line to the CATV
2
input (
illustration on the next page).
Noting the pin orientation, gently insert one end of
3
the enhanced S-video cable into the S-Video Output
port (
For XCLAIM VR installations, insert the other end of
4
the cable into the enhanced S-Video Input port
(
for G3-only installations, insert the other end of the
cable into the enhanced S-Video Input port on the
Audio/Video option card.
Static electricity can damage sensitive electronic
components. Discharge your bodyÕs static electric
charge by touching a grounded surface Ñ for
example, the metal area of the computer chassis Ñ
before performing any hardware procedure.
The manufacturer assumes no liability for any
damage, caused directly or indirectly, by improper
installation of components by unauthorized service
personnel. If you do not feel comfortable performing
the installation, consult a qualiÞed technician.
Make sure power is off during installation;
otherwise, damage to the TV tuner, the graphics
accelerator card, and injury to yourself may result.
) on your XCLAIM TV tuner (refer to the
) on your XCLAIM TV tuner.
) on the back of your XCLAIM VR card, or
S VID IN
Page 3