Carmanah SPEEDCHECK 교체 매뉴얼 - 페이지 8

{카테고리_이름} Carmanah SPEEDCHECK에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah SPEEDCHECK 10 페이지. For the solar-powered speedcheck-15/18 radar speed signs
Carmanah SPEEDCHECK에 대해서도 마찬가지입니다: 교체 매뉴얼 (10 페이지), 교체 매뉴얼 (11 페이지)

페이지 인쇄

4. Remove the four nyloc nuts and remove the top rail drip shield. You will receive a new one with the

replacement display assembly.

5. Retain the static sign to be reused.

4.4

Installing New Display Assembly

1. Install the new top rail drip shield onto the new sign as shown below.

2. Secure the new top rail drip shield with the four nuts from

3. Carefully slide the new display assembly up into the top rail.

4. Adjust display assembly until all holes are lined up with the static sign threaded inserts.

5. Secure the assembly with the six security screws from

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

DISPLAY ASSEMBLY REPLACEMENT GUIDE

Section

4.3.

Section

4.3.

[email protected]

carmanah.com