ATI Technologies AT1825 사용자 설명서 - 페이지 6

{카테고리_이름} ATI Technologies AT1825에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies AT1825 14 페이지.

페이지 인쇄

Rear Panel Layout

A. Balanced (XLR) Audio Inputs

Use the BALANCED INPUT jacks to connect to the

outputs of a preamplifier or other control device with

XLR outputs. The XLR jack is wired Pin 1 - Ground,

Pin 2 - Hot, and Pin 3 - Cold.

B. Unbalanced (RCA) Audio Inputs

Use the UNBALANCED INPUT jacks to connect to

the outputs of a preamplifier, receiver with preamp-

out connections, CD player, or other source device

with RCA style outputs.

C. Input Selector Switch

Selects either the BALANCED INPUT (XLR) or the

UNBALANCED (RCA) INPUT jack.

D. Remote Trigger Input

Use the REMOTE TRIGGER jack to connect to a

compatible preamplifier, source device, or other

product with a 3.3-24 VDC output.

E. Chassis Ground Terminal

Use to connect to other chassis where necessary.

Amplifier Channel To Speaker Map

AT1820 Manual

Amplifier Channel

CHANNEL 1

CHANNEL 2

CHANNEL 3

CHANNEL 4

CHANNEL 5

CHANNEL 6

CHANNEL 7

F. Circuit Breaker / Main Power Switch

G. AC Inlet

Use the included power cord to connect your amplifier

to an AC power source.

H. Speaker Outputs

Use the OUTPUT binding posts to connect the amplifi-

er to your speakers. The post with the red accents is

positive. The post with the black accents is negative.

I. Channel Name Label

ATI provided labels that use standard speaker location

names to mark the amp and wires to make install and

debugging easier.

J. Power Configuration Label

Calls out AC voltage and frequency, power consump-

tion and circuit breaker trip current.

Speaker

Rev-05/21