DREAMGRIP Evolution MOJO 사용자 설명서 - 페이지 8

{카테고리_이름} DREAMGRIP Evolution MOJO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DREAMGRIP Evolution MOJO 14 페이지. Universal transformer rig

VI.

MOUNTING LED LIGHTS

Each of two Grip features one cold shoe nest on a tilted platform. To mount the LED lights on

it you need to first to lose the tightening nut on the light base, slide it into the cold shoe, and

tighten the nut to fix the light on the Rig.

Pic.9. Mounting LED lights (included in Evolution MOJO set only).

The tilted cold shoes on the Grips is the best place for the two LED lights as the lightening

has less shadow if two light sources are placed in a distance one from the other. Although

you can use the lights at any other position at the Rig along the Tracks, or even connect it on

top of each other through the cold shoe formed nests at 3 sides of the LED light housing.

NOTE: Before using the light at the very first time you need to release the protective film that

isolates the accumulator contacts for safe transportation.

The accumulator capacity normally is enough to support the light for at least one hour with

high light intensity. The accumulator can be recharged with a standard USB power supply

adapter (not included) or any other devise with USB power supply as a laptop (not included).

(!) ATTENTION: For your safety use only the original USB cable (2 cables included in Evolution

MOJO set only) to recharge the accumulator.

(!)TIP: Use the dimmer to control the light intensity depends of the particular external light

conditions and the current distance to the filming object.

(!)TIP: Grips can be fixed on the Rig in one of the three positions using cavities at the ends of

Tracks. It will help you to adjust the light directions for shooting a close object.