ANDELI MCT-520DPL 소유자 매뉴얼
{카테고리_이름} ANDELI MCT-520DPL에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ANDELI MCT-520DPL 8 페이지. Multifuction welding&cutting machine
ANDELI MCT-520DPL에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)
페이지 인쇄
Содержание
OWNER'S MANUAL ANDELI MCT-520DPL
CT SERIES INVERTER PLASMA CUTTER
CONTENTS
1. Contents
2. Safety warning
3. Machine description
5. Panel function description
11 . Questions to be run into during Cutting 10
13 . Explosive view
2.SAFETY WARNING
On the process of welding or cutting, there will be possibility of injury, so please take protection into consideration during operation. For more details please review the
Operator Safety Guide, which complies with the preventive requirements of the manufacturer.
Electric shock-----May lead to death ! !
•
Set the earth fitting according to applying standard.
•
Forbidden to touch the bare electric parts and electrode with uncovered skin, wet gloves or clothes.
•
Make sure you are insulated from the ground and the workshop.
•
Make sure you are in safe position.
Gases and fumes-----May be harmful to health!
•
Keep your head out of the gases and fumes.
•
When arc welding, ventilators or air extractors should be used to avoid breathing gases.
Arc rays------Harmful to your eyes, burn your skin.
•
Wear suitable protective mask, light filter and protective garment to protect eyes and body.
•
Prepare suitable protective mask or curtain to protect looker-on.
Fire
• Welding spark may cause fire, make sure there is no tinder stuff around the welding area.
Noise-----Excessive noises will be harmful to hearing.
•
Use ear protector or others means to protect ear.
• Warn looker-on that noise is harmful to hearing.
Malfunction-----When trouble happens, contact with authorized professionals.
•
If trouble happens during installation and operation, please follow this manual instruction to check up.
•
If you fail to fully understand the manual, or fail to solve the problem with the instruction, you should contact the suppliers or the service center for professional help.
WARNING! Electric leakage protecting switch should be added when using the machine ! ! !
3.MACHINE DESCRIPTION
The welding machines are rectifiers adopting the most advanced inverter technology, which can apply in plasma cutting system of using pressing air.
Каталог радиолюбительских схем
1
2
3
4
4
6
8
8
9
9
11
14
Я радиолюбитель