ATI Technologies MMA400-800 운영 및 유지보수 매뉴얼 - 페이지 8

{카테고리_이름} ATI Technologies MMA400-800에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies MMA400-800 10 페이지. Line and microphone amplifiers

A shaft extender kit (Model SE-8) is available to convert the screwdriver

adjustments to fingertip control. This is a user installed option which requires

removal of the front panel (4 screws), removal of the original screwdriver adjust

shafts by pinching the rear of the shaft and pulling it out of the pot, replacement

of the original shafts with the new ones and finally replacement of the panel (3

screws are enough, forget the one you dropped on the floor). In case you think

that we are giving you the shaft, forget it, these aren't free. Call Mr. Rockefeller in

our Parts and Accessories Department to order.

Output stage gains are set to +6dB, +16dB or +26dB by moving jumper

plugs P1, P2, P3 or P4 from their center position to the +10dB position on the

right or to the +20dB position on the left.

Audio Technologies Inc.

■

856-719-9900

■

■

www.

audio.com