Anden A210V1 설치 및 운영 지침 매뉴얼 - 페이지 8

{카테고리_이름} Anden A210V1에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anden A210V1 16 페이지.
Anden A210V1에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

START UP AND SEQUENCE OF OPERATION

USING THE DEHUMIDIFIER CONTROL

1. Press the ON/OFF button to turn the dehumidifier control ON� The display will show the current setting, and the dehumidifier blower will turn on

to start sampling the air�

The setting will be replaced by the measured humidity and "AIR SAMPLING" will show on the display�

2. Use the UP or DOWN button to adjust the humidity setting as desired�

3. After three (3) minutes of sampling, the measured humidity will be compared to the setting:

a. If the humidity is above the setting, the dehumidifier compressor turns on and "AIR SAMPLING" will be replaced by "DEHUMIDIFYING"� The

compressor remains on until the measured humidity falls 3% RH below the setting�

b. If the measured humidity is below the setting, the blowers turn off and the display returns to showing the RH setting�

4. The dehumidifier will sample again after the number of minutes selected during the Air Sampling portion of the SYSTEM SET UP (see page 9), or

any time the humidity setting is lowered�

USING THE MODEL A77 CONTROL

1. Press the ON/OFF button to turn the dehumidifier control ON� "REMOTE" will show on the display to indicate that an external control is wired to

the dehumidifier�

2. At the Model A77, press the ON button; the Model A77 will display the measured RH�

3. Use the UP or DOWN button on the Model A77 to adjust the humidity setting as desired�

4. If the RH measured by the Model A77 rises above the setting, the dehumidifier will turn on� "DEHUMIDIFYING" will appear on the dehumidifier

control display to show that the Model A77 is calling for dehumidification� The dehumidifier will turn off when the RH measured by the Model A77

drops 3% RH below the setting�

8 English