ATI Technologies SR-82 교체 매뉴얼 - 페이지 7

{카테고리_이름} ATI Technologies SR-82에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies SR-82 10 페이지. Robotic collision sensor switch

6. Reposition the Connector Block Assembly for final attachment.

7. Slide the plastic flat washer onto the mounting screw and apply a drop of Loctite 222MS to the

end of the threads.

8. Install the mounting screw and plastic flat washer.

9. Press the Connector Block Assembly firmly against the body of the Collision Sensor while

tightening the screw. When tightened securely, the Connector Block Assembly should rest

parallel to its mounting surface.

10. Confirm the integrity of the circuit between the 3‑pole Nano connector and the internal switch

by following the instructions in

Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: 919.772.0115 • Fax: 919.772.8259 • www.ati‑ia.com

Manual, Collision Sensor Switch Replacement, SR‑82

Section 1.4—Electrical

Connection.

Document #9610‑60‑1017‑03