ATI Technologies 39-0214 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} ATI Technologies 39-0214에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies 39-0214 4 페이지.
페이지 인쇄The ATL HDX Reader
The ATL HDX reader can be found in all ATL products which use automatic identification.
Examples are parlour auto-id systems, Pegasus sorting gate systems and out of parlour
feeding systems.
If two (2) or more ATL HDX readers are in close proximity, they may interfere with one
another and adversely affect performance. In order to overcome this, the readers need to be
synchronised together. This can be achieved by connecting a twisted pair data cable between
the readers and connecting into the synchronisation port as shown in the diagram below.
Master / Slave Jumper
*see below
Signal
Sync Por t
Master / Slave Jumper Settings
= Mast r e
= Slave
V2.00.03
16-12-08
ATL HDX READER
SYNC: 1
WARNING: DO NOT RUN TWISTED PAIR
DATA CABLE NEXT TO MAINS CABLES OR
CABLES CARRYING HIGH CURRENT AS
WILL CAUSE INTERFERENCE AND SYSTEM
WILL NOT FUNCTION CORRECTLY.